I was gonna start doing bushings, but I, for some reason, decided I wanted to make my car look ghetto-er first.
I picked up VIS rear and sides for $250 off a local, knowing full well that it wouldn't fit right. sure enough, the sides were about 2cm short.
So, I decided I was gonna do everything cheaply and I cut it in half and fiberglassed it together to lengthen it a bit.
Test fit after I cut it in half with my newly acquired dremel.
I picked up VIS rear and sides for $250 off a local, knowing full well that it wouldn't fit right. sure enough, the sides were about 2cm short.
So, I decided I was gonna do everything cheaply and I cut it in half and fiberglassed it together to lengthen it a bit.
Test fit after I cut it in half with my newly acquired dremel.
My protection against the flying fiberglass dust
Applied some fg to the outside while still on the car to get the spacing down right, took it off, and did the backside. please keep in mind, this is my first time working with this isht.
After a bit of shaving, body-filler-ing, sanding, and painting:
Still have the other side skirt to lengthen and rear lip to shorten. yes, i will probably keep it black. no money to paint match it
RSS Feed